コマンドモードマニアル　

CW Keyboard: type what you want the keyer to send (all commands are preceded with a backslash ( \ )

\? Help (requires FEATURE_SERIAL_HELP)
\/ Paged Help (requires FEATURE_SERIAL_HELP)
\# Play memory # (requires FEATURES_MEMORIES; play memories 1 - 10 (0 = memory 10) )
\a Iambic A mode
\b Iambic B mode
\c Single Paddle mode
\d Ultimatic mode
\e#### Set serial number to ####
\f#### Set sidetone frequency to #### hertz
\g Bug mode
\h Toggle between CW and Hell sending (requires FEATURE_HELL)
\i Transmit enable/disable
\j### Dah to dit ratio (300 = 3.00, do \j alone to set to default)
\k CW Training Module (requires FEATURE_TRAINING_COMMAND_LINE_INTERFACE)
\l## Set weighting (50 = normal, do \l alone to set to default)
\m### Set Farnsworth speed
\n Toggle paddle reverse
\o Toggle sidetone on/off
\p#(#) Program memory #
\q## Switch to QRSS mode, dit length ## seconds
\r Switch to regular speed mode
\s Status
\t Tune mode
\u Manual PTT toggle
\v Toggle potentiometer active / inactive (requires FEATURE_POTENTIOMETER)
\w### Set speed in WPM
\x# Switch to transmitter #
\y# Change wordspace to # elements (# = 1 to 9)
\z Autospace on/off
\+ Create prosign
\!## Repeat play memory
\|#### Set memory repeat (milliseconds) (backslash and pipe)
\* Toggle paddle echo
\` Toggle straight key echo
\^ Toggle wait for carriage return to send CW / send CW immediately
\& Toggle CMOS Super Keyer Timing on/off
\%## Set CMOS Super Keyer Timing %
\. Toggle dit buffer on/off
\- Toggle dah buffer on/off
\~ Reset unit
\; Toggle cw send echo
\{ QLF mode on/off
\> Send serial number, then increment
\< Send current serial number
\( Send current serial number in cut numbers
\) Send serial number with cut numbers, then increment
\[ Set Quiet Paddle Interruption
\= Toggle American Morse mode (requires FEATURE_AMERICAN_MORSE)
\@ Mill Mode
\}#### Set potentiometer range - low ## / high ##
\" Hold PTT active with buffered characters
\; FUTURE
\] FUTURE
\_ FUTURE - Set Clock
\\ Immediately clear the buffer, stop memory sending, etc.
\: Extended CLLI commands